Remote Control Of The Cable Converter; Programming The Remote Control Of The Cable Converter; To Operate The Cable Box Once The Remote Is Programmed For It - Hitachi VT-MX431A Owner's Manual

Hitachi vcr user manual

Hide thumbs Also See for VT-MX431A:

Table of Contents

REMOTE CONTROL OF THE CABLE CONVERTER

If you have a cable converter, you will probably want to program your VCR's remote control so

you can easily change channels. The process is the same as for programming the remote to

operate your TV.

1 Program the remote control

Hold down the CATV button and press the number of your brand of cable box (shown in the

chart).

NOTE: If that button combination does not work, or if your brand is not on the chart, just go

through all the button combinations until you find the one that works best.

Press the CATV button and then the button of the function you want.

For example;

Press the CATV button and the CH (

), and the cable converter station will change to the

next higher station.

NOTE: Also, you may change the channels at the cable converter by using the number

buttons. If you can not change the channels at the cable converter by using the number

buttons, press the ENTER button after you press the number buttons. It may change channels

at the cable converter.

Press the VCR button to operate your VCR with the remote again.

Table of Contents