Table of Contents
Advertisement
...........
Basic Operations (Playback)
:
Manual Rewind
Press STOP and REW.
The VCR rewinds the tape all the way to the beginning,
then stops.
Press STOP/EJECT
on the VCR to release the tape.
Movie Return
If your videocassette
has the safety tab removed,
the VCR will stop and
automatically
rewind the videocassette,
eject it, and turn off the power when it
reaches the end of the tape or a blank section of tape which lasts for more than
30 seconds.
This function
works only in PLAYBACK
mode, not in RECORDING
mode.
Special
Playback
Effects
Visual Search
This function
lets you search backward
and forward
through the videotape
while
viewing
it.
Using the buttons on the remote control:
Press PLAY and then REW to search in reverse.
Press PLAY and then F.FWD to search ahead.
Press PLAY again to return to to normal playback.
Press REW or F.FWD and hold it; you can search backward
or forward
through
the tape at a higher speed while viewing it.
Press PLAY and REW, then hold REW for backward
search at a higher speed.
Press PLAY and F.FWD, then hold F.FWD for forward
search at a higher
speed.
Release REW or F.FWD to return to normal playback
Still Playback
(Pause)
Press PAUSE on the remote control to still the tape during play. The picture will
"freeze".
You may see some minor noise or interference
on the screen.
This is
normal.
After 1 minute in PAUSE mode, the VCR automatically
switches
to STOP mode
to protect the tape.
If noise bars appear
on the TV screen during PAUSE mode, first set the VCR to
SLOW
mode by using the SHUTTLE
dial and then press the CHANNEL
up or
down button to minimize
the noise bars.
If the screen jitters during PAUSE,
press the CHANNEL
up or down button to
minimize
it.
To resume
play, press PLAY or PAUSE again.
29
Advertisement
Table of Contents
