Table of Contents
Advertisement
Getting Started (Initial Setup)
To set the clock
manually
1. Press GUIDE,
then press 3 to bring up the CLOCK
SET screen.
Press 1 to switch "CLOCK
SET <AUTO>"
of item 1 to "CLOCK
SET
<MANUAL>".
If "CLOCK
SET <MANUAL>"
is specified
in item 1, "SET TIME ZONE"
of item
3 or "SET D.S.T." of item 4 are not displayed.
2. Press 2 to bring up the following
screen.
Press the number buttons on the remote control to set the current time--two
digits
for the hour and two for the minutes. Then press 1 or 2 for AM or PM,
respectively.
For example,
if it is now 2:15 PM, press 0, 2, 1, and 5 for hours and minutes,
and
press 2 for PM.
Continue
pressing
buttons to set the date. For example,
if today is July 8, 1996,
press 0, 7, 0, 8, 9, and 6 to get 07/08/96.
When you're done, press GUIDE twice to return to regular viewing.
Tips:
The white dash "--" appears for the item to be changed
on the screen as you
proceed.
The clock uses the 12-hour
system.
You set it for AM or PM.
An illogical time (like 13 for the hour or 20 for the month) will not be accepted.
If you press the wrong digit, exit the screen by pressing GUIDE and recall the
screen to enter the correct setup.
The day of the week is set automatically.
More About Channel
Selections
Your VCR is capable of receiving
68 broadcast
TV channels
(VHF 2-13, UHF 14-
69) and 125 cable channels
(CATV 1-125).
1. Press GUIDE,
then press 4 to bring up the CHANNEL
PRESET
screen.
2. Press 1 to select the type of receiving
setup you have.
Each time 1 is pressed,
the option for "1 CHANNEL"
switches
from <CATVI>
to
<ANT>,
<CATV2>
and back to <CATVI>.
<CATVI>:
Ordinary
cable
<ANT>:
Internal or external antenna
22
Advertisement
Table of Contents
