Table of Contents
Advertisement
Getting Started
7 Switch
the RF or Video Channel
When the VCR is on, its video signal can come into your TV on either channel
3
or channel
4. You need to select the appropriate
channel.
If you already have a tape in the VCR, eject it. When the power is turned on,
press POWER
to turn it off. Press PLAY/STILL
on the VCR to turn the power on
again. Pressing the CHANNEL
UP button on the VCR alternates
between
RFCH-
03 (channel
3) and RFCH-04
(channel
4) in the VCR's display. Display the
channel
which is not used by a commercial
channel
in your area.
Your basic hookup is now complete.
When you're ready to try hooking
up a
second VCR or a video camera
for a complete
home entertainment
system,
see
Advanced
Operations.
Now turn the TV and VCR back around facing you and begin your quick tour of
the controls
(page 15).
]5
Advertisement
Table of Contents
