Hitachi 42PD8800TA User Manual page 18

CONNECTION (continued)
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated(AC100-240V, 50/60Hz). It may cause fi re or electric shock.
For the plasma display, a three-core power cord with a ground terminal is used for effi ciency protection. Always be sure
to connect the Power Cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If
you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certifi ed power cord that meets your region's safety standard.
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the band.
When you secure the cables, please be careful not to tighten too much.
INPUT INPUT INPUT INPUT
OUTPUT
(AV1) (AV2) (AV3) (AV4)
Y/VIDEO Y/VIDEO
S-VIDEO
SUB
P P WOOFER
B B
VIDEO
VIDEO
P P VIDEO
R R
AUDIO AUDIO AUDIO AUDIO AUDIO
L MONO L MONO L MONO L MONO L
C C C C
R R R R R
A C
With long band
17
ANT
WOW, SRS and symbol are trademarks of SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
SERVICE USE ONLY
POWER SWIVEL
INPUT(RGB)
AUDIO How to fasten the band:
To tighten
PC
ANALOG RGB
INPUT(HDMI)
AUDIO
HDMI2
To loosen
HDMI1
Knob
Pull the band in the
direction of the arrow.
Loosen the band by
pushing the knob in the
direction of the arrow.