Hitachi 42PD8800TA User Manual page 16

CONNECTION (continued)
Connecting Procedure (continued)
Monitor Out can be used to display same image as main unit on another monitor.
When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from
composite(AV1~5), or S-Video(AV3,5), or RF signal can be displayed to the external monitor.
OUT
VIDEO
AUDIO
L
R
Sub Woofer terminal can bring the deep bass sound from the external speaker.
SUB
WOOFER
PC terminals (D-sub 15 pin + audio) is connected to PC, which allows Analog RGB signal.
HDMI 1 2 terminals can be connected to the devices with HDMI output, or if the external device has DVI output, this can be
available with HDMI-DVI conversion cable. In case of using the HDMI-DVI, connect to audio terminal besides HDMI.
HDMI2
(HDMI)
HDMI1
(HDMI)
Information
HDMI(High Defi nition Multimedia Interface) is next-generation multimedia I/O interface. Only one cable is used to
transmit all video/audio/control signals, which creates easy connection.
Moreover, those digital signals can produce high quality data without any degradation.
You are provided two HDMI terminals, one of the most remarkable features.
If your external device has a HDMI terminal, HDMI connection is recommended for higher quality picture and sound.
NOTE
When both HDMI 1 and HDMI 2 terminals are connected to devices via HDMI-DVI conversion cable, HDMI 2 has
a priority over the audio terminal.
15
OUT
IN
(Mini Stereo plug)
IN
(Mini Stereo plug)
or
OUT
or
OUT
(DVI)
(HDMI)
[Example]
IN
DVD player
[Example]
IN
[Example]
[Example]
VCR
DVD player
Set-Top Box
VCR