Table of Contents
Advertisement
MENU OPERATION (continued)
Setup Menu (AV mode)
With this menu, you can select or adjust the condition of the input signals from each terminal.
Selected Items
System 1
System
System 2
Color
AV1~AV5
system
Video
AV1, AV2
Input
Auto
PAL
System 1
SECAM
NTSC4.43
NTSC3.58
Auto
NTSC-M
System 2
PAL-M
PAL-N
Auto
HDTV
SDTV/DVD
Setup hint
Do not change the original setting.
(System1: Europe/Asia, System2:North America)
Composite and S-video input only.
Select the color system depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], select the system according to the color system
of the input signal.
Composite and S-video input only.
Select the colorimetry depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], set this to match the input signal.
Component Input only.
Setup
System
System 1
Color System
Video Input
Select
Set
Return
24
Advertisement
Table of Contents
