Page 2
... any technical problems or other questions you need clarified? Please contact: your sales partner your sales outlet You will find further information in the manuals "Safety" and "Ergonomics". The latest information and updates (e. g. BIOS update) on our mainboards can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards...
Page 4
Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH A26361-D1501-Z120-1-7419 Bestell-Nr./Order No.: Printed in the Federal Republic of Germany AG 0203...
Page 5
Deutsch English Mainboard D1501 Technisches Handbuch Technical Manual Ausgabe Februar 2003 February 2003 edition...
Page 6
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt. Copyright ã Fujitsu Siemens Computers GmbH 2003 Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Introduction This technical manual describes the mainboard D1501. You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD.
The equipment and tools you use must be free of static charges. Remove the power plug from the mains supply before inserting or removing boards containing ESDs. Always hold boards with ESDs by their edges. Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1501-Z120-2-7419...
Cover monitoring: cover monitoring reports when the cover has been opened without authorisation. System, Setup and Keyboard password parallel and serial ports can be deactivated Floppy disk write-protection via BIOS Setup Boot hard disk virus warning function English - 3 A26361-D1501-Z120-2-7419...
Page 12
1 external parallel port (ECP- and EPP-compatible) two external serial ports (COM1 and COM2) two external USB ports (USB = Universal Serial Bus) 1 LAN connector (RJ45) 1 VGA port two external PS/2 ports for keyboard and mouse 4 - English A26361-D1501-Z120-2-7419...
Baseboard management controller format 60 x 50 mm Interrupt-Controller Chipset: Winbond W83910F and W24100S EEPROM 2 Mbyte (Winbond W39F010P) 80-pin connector quartz frequency: 40,000 MHz and 32,768 KHz Installing on the mainboard (2 screws M2x5 mm) English - 5 A26361-D1501-Z120-2-7419...
Unauthorised opening of the cover is detected, even when the system is switched off. However, this will only be indicated when the system is switched on again. This procedure generates an entry in the BIOS Error Log. English - 7 A26361-D1501-Z120-2-7419...
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode). 1 = Yellow indicator. a connection exists (e.g. to a hub). 2 = Green indicator: Link Mode: the LAN connection is active. WOL mode: a Magic Packet is being received. 8 - English A26361-D1501-Z120-2-7419...
Start the PC, if the following message appears, press the key combination [Ctrl] and [A] : Press <Ctrl> <A> for SCSI Select (TM) Utility! In the first menu the available U320 SCSI Controller are displayed. The onboard SCSI controller of D1501 is displayed with the following entry: AIC-7901 at slot 00 00:04:00 English - 9...
Page 18
The administration of the RAID system can be set later by a tool in your operating system (see therefor the documentation "Storage Manager Browser Edition"). this tool currently is available for Windows NT4 and Windows 2000. 10 - English A26361-D1501-Z120-2-7419...
Page 19
BIOS Support for Bootable CD-ROM**** Enabled Multiple LUN Support Enabled The setting is valid only if is enabled ( Enabled **** The setting is valid only if the Int 13 Supportof the SCSI controller is enabled ( English - 11 A26361-D1501-Z120-2-7419...
If your boot device has multiple LUNs (Logical Unit Numbers) and Multiple LUN Support is Enabled, this option allows you to specify which LUN to boot from on your boot device. The default setting is LUN 0. 12 - English A26361-D1501-Z120-2-7419...
BIOS Multiple LUN Support This option determines whether booting from a SCSI device that has multiple LUNs (Logical Unit Numbers) is supported. The default setting is No (disabled). English - 13 A26361-D1501-Z120-2-7419...
The default setting is Verbose. While the system is booting, the SCSI controller's BIOS reports which devices are connected to the SCSI bus. Further settings are Silent (no messages are shown) and Diagnostic (additional information are shown for diagnostics purposes). 14 - English A26361-D1501-Z120-2-7419...
Page 23
If a removable-media device is controlled by the SCSI controller BIOS, do not remove the media while the PC is on. BIOS Support for Bootable CD-ROM This option determines whether the BIOS supports a CD-ROM drive startup drive, i.e. you can bott from CD-ROM. The default setting is Enabled. English - 15 A26361-D1501-Z120-2-7419...
With Format Disk a selected hard disk is formatted in low-level format. Normally hard disks are already formatted in low-level format. You should use this menu item only if you want to erase the hard disk completely and regenerate the error list. 16 - English A26361-D1501-Z120-2-7419...
The jumper JP16 allows the selection, by which chip the system start up is initiated and controled. Power-on/off can only be controlled by the Baseboard Management Controller (default setting). Baseboard Management Controller and Super I/O (BMC) can control Power-on/off. English - 17 A26361-D1501-Z120-2-7419...
The PCI slots 2-5 are supplied with 5 V main voltage, the PCI slot 1 with 3,3 V. PCI slot 1 supports a Zero Channel RAID Controller. PCI slot 4 supports RSB (RSB = Remote Service Board) with battery package. PCI slot 5 supports RSB without battery package. 18 - English A26361-D1501-Z120-2-7419...
Since a counter-plate is mounted on the underside of the mainboard for reinforcement, no heat sinks of the type "Intel Boxed" may be used. Otherwise the retaining clips of the heat sink will be damaged. Only use the supplied heat sink and the supplied retaining springs. English - 19 A26361-D1501-Z120-2-7419...
Page 28
When using the previous heat sink: Ê Apply an even coat of heat conducting paste to the entire surface of the processor and mount the heat sink on it. Fix the heat sink with the supplied retaining Ê springs. 20 - English A26361-D1501-Z120-2-7419...
At the same time flip the both lateral holders upwards until the memory module snaps in place (2). Removing a memory module Ê Push the clips on the right and left of the memory slot outward (1). Pull the memory module out of the memory slot (2). English - 21 A26361-D1501-Z120-2-7419...
Press the locking lug in the direction of the arrow (1); the battery jumps somewhat out of the holder (2). Ê Remove the battery (2). Ê Insert a new lithium battery of the same type into the socket (3). 22 - English A26361-D1501-Z120-2-7419...
Super Video Graphic Adapter Graphics Performance Universal Serial Bus Accelerator Inter Integrated Circuit Video Graphic Adapter IAPC Instantly Available Power Wake On LAN Managed Desktop PC Design I/O Controller Hub Intelligent Drive Electronics IPSEC Internet Protocol Security English - 23 A26361-D1501-Z120-2-7419...
Page 32
Information on this document On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu- ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So- lutions. This document from the document archive refers to a product version which was released a considerable time ago or which is no longer marketed.