Procedure - Fujitsu PRIMERGY TX100 S1 Service Supplement Manual

2

Procedure

V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Ê First of all please familiarize yourself with the safety instructions in the
section chapter "Safety notes" on page
Ê Ensure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server, the Options Guide for the server and the Technical Manual for
the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the
page 17.
Ê Replace the defective component as described in the relevant chapter.
Ê Close the server.
Ê Connect the cables.
Ê Connect the server to the power outlet.
Ê Start the operating system.
Ê If necessary, configure the server as required.
1
These procedures are described in the Operating Manual or in the Option Guide.
TX100 S1
1
1
1
Service Supplement
11.
chapter "Replacement routines" on
1
1
9