NordicTrack NTL99011.1 User Manual page 10

7. Start four #10 x 3/4" Screws (9) with four #10
Star Washers (32) into the Pulse Bar (112) and
the Left and Right Handrails (88, 87).
Slide the Pulse Bar (112) as far in the direc-
tion shown as possible, and then tighten the
#10 x 3/4" Screws (9). Do not overtighten the
Screws.
Remove the wire tie from the Upright Wire (81).
8. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Remove the four indicated 1/4" x 1/2" Screws
(4) from the Console Frame (104). These are
used in assembly step 11.
Attach the Left and Right Cup Holders (36, 27)
with eight #8 x 1/2" Screws (1). Do not over-
tighten the Screws.
7
Wire
Tie
81
9
32
8
1
4
104
Console
Assembly
10
112
88
36
1
27
1
1
4
9
32
87