D-Link DFE-690TXD User Manual page 29

the "Network path or queue name:" box. However, it is easier to click the
"Browse" button and navigate to the location of the printer. Click "OK"
when you have selected the desired printer. Finish the installation by
continuing the "Add Printer Wizard" normally.
M. You may now use the Network Printer as if it was connected directly.
Note: the computer that the printer is connected to must be "on" to use the
printer. If you find this inconvenient, devices known as Network Print
Servers are available from D-Link including the DP-301 and DP-101P. A
Network Print Server would allow y ou to directly connect your printer to
your network without worrying about which computer is "on."
- 28 -