Listening To Radio Broadcasting - Kenwood RD-K511USB Instruction Manual

Listening to Radio Broadcasting

PTY
MULTI CONTROL
TOOL
ENTER
STOPF
TUNER
I/J
G/H
DISPLAY/
CHARAC.
Numeric
44
K-511USB/RD-K511USB
A radio station in the FM/AM band can be selected
and listened to.
Listening to Radio Broadcasting
1
Select the FM or AM band.
Press [TUNER].
Each press switches the FM/AM band.
FM radio
FM lit
AM radio
AM lit
2
Select a radio station.
Selecting a station preset in the
memory (Preset call)
Select a radio station from the preset memory (No.
P01 to P40).
Press [G/H].
Press [MULTI CONTROL C/D].
When preset No. P27 is
selected
• Pressing and holding the button switches the preset
numbers at a high speed.
• The preset number can also be entered directly.
Press the numeric button(s) to select.
To select preset No. P27
Press [+10] twice and [7] once.
Selecting a station that is not preset in
memory (Auto tuning/Manual tuning)
1 Select the tuning mode.
Press [STOPF].
Each press switches the selection.
Auto tuning
Auto reception is possible
AUTO lit
when the radio wave
condition is favorable.
Manual tuning
AUTO lit
When the radio wave
condition is poor, vary
the tuning frequency
manually.
When auto tuning is
selected:
2 Select a station.
Press [I/J].
Press [MULTI CONTROL A/B].
■ Auto Tuning:
Each press tunes into the next receivable station
automatically.
■ Manual Tuning:
Each press varies the frequency by 1 step. Hold
the button or tilting the knob continuously varies
tuned frequencies at a high speed.
• No audio is output during either auto or manual tuning.
• Auto Tuning receives stations in stereo audio but Manual
Tuning receives them in monaural audio. "TUNED" lights
up when a station is tuned. "STEREO" lights up when
stereo broadcasting is tuned.
45
English