Recording In The Digital Audio Player - Kenwood RD-K511USB Instruction Manual

Recording in the digital audio player

USBE
SD1E
SD2E
AUX
MULTI CONTROL
ENTER
CDE
STOPF
TUNER
G/H I/J
Numeric
56
K-511USB/RD-K511USB
The audio of the CD, SD, USB, TUNER and AUX
sources can be recorded in the analog format in a
kenwood digital audio player.
Preparation before recording
• Prepare the audio source to be recorded.
1
Connect the digital audio player to
the [REC OUT] terminal.
REC OUT
(as of Aug. 2008)
Connectable kenwood digital
audio player/recorder models
M2GC7/M1GC7/MGR-A7
• Also read the instruction manual for the connected
digital audio player.
2
Select the audio source to be
recorded.
Press [CDE]/[SD1E]/
[SD2E]/[USBE]/
[TUNER]/[AUX].
• The CD, SD and USB sources should be set to stop
mode.
3
Prepare recording.
Recording CD/SD/USB tracks/fi les
Select the track/fi le to be recorded or pause at the
position where you want to start recording.
Recording radio broadcasting
Select the station to be recorded. (page 44)
Recording AUX source
On the AUX-connected external component, start
playback of the source.
4
Start recording of the digital audio
player.
• For the recording procedure, also refer to the manual
for the connected digital audio player.
Recording CD/SD/USB tracks/fi les
Press [CDE]/[SD1E]/
[SD2E]/[USBE].
Recording radio broadcasting
Recording starts.
Recording AUX source
Recording starts.
■ To stop the track/fi le being recorded:
Press [STOPF].
■
To stop recording:
Press the stop button of the connected digital
audio player.
■
If the recorded audio is distorted or its level is
too low:
Adjust the recording level. Adjust the recording
level. For details, see "Setting the recording level
(REC LEVEL)". (page 88)
57
English