Using The Multicamera Management Software; Launcher - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Configuration

Using the Multicamera Management Software

Before you begin installing this application software, the hardware system requirements must be checked first. The
minimum system requirements recommended for this application are as follows:
• Windows 2000,XP or Vista
®
• At least 256MB of memory (512MB recommended)
• A wireless (802.11b or 802.11g) or Ethernet network
• Internet Explorer 6.x or higher Internet Web Browser
• VGA card resolution: 800x600 or above
• CPU: 1.3GHz or above processor (2.4GHz processor or higher with 512MB memory and a 32MB video
card is required for multiple camera viewing and recording in IP surveillance program)
Launcher is a controller program that allows users to invoke Monitor or Playback quickly.
The Launcher icon reflects current state of IP surveillance. The
Software is currently active on the system.
When Launcher starts, there is no need to undergo a username/password check.
But when users want to click on the icon of Launcher on system tray, Launcher
will pop up a username/password dialog the first time for menu popup or when
Launcher is locked. If a user fails to pass the authentication check, no menu will
show up. If a user fails 3 consecutive tries he/she will be locked out for a period
of 60 seconds.
D-Link DCS-10 User Manual

Launcher

System Tray Icon
icon in the system tray signifies that the IP surveillance
Security for Launcher