Configuration; D-Link Click'n Conenct (Dcc) - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Configuration
Turn on the computer and Insert the D-Link DCS-2120 Driver CD in the CD-ROM drive. The step-by-step instructions
will help you to search and setup your IP camera smoothly and quickly.
If the CD Autorun function does not automatically start on your computer, click Windows
command box type "D:\DCS5220.exe", where D: represents the drive letter of your CD-ROM. If it does start, proceed
to the next screen.
DCC will show the MAC address and IP address of your DCS-2120. If you have a DHCP* server on your network,
there will be a valid IP Address displayed at the end of DCC process. You can begin to use the IP camera
now.
*A DHCP server is a device that supplies IP Addresses to its
clients that are on the same network.
Click Start
D-Link DCS-10 User Manual

Configuration

D-Link Click'n Conenct (DCC)

® Start > Run. In the Run
11