D-Link SECURICAM Network DCS-2120 User Manual page 25

Section  - Configuration
HTTP Port:
Enable RTSP authentication:
Access name for computer viewing:
Access name for mobile viewing:
RTSP port:
RTP port for video:
RTCP port for video:
RTP port for audio:
RTCP port foraudio:
D-Link DCS-10 User Manual
Can be set to another value other than the default port 80. When the administrator changes the HTTP
port of the DCS-2120(which has an IP address of 192.168.0.100) from 80 to 8080, you must type
http://192.168.0.100:8080 in the web browser address field to reach the web configuration page.
This option will turn on the authentication of RTSP. You need to specify access name to login
camera like this: rtps://cameraip/live.sdp.
This option allows you to specify the file name for RTSP streaming thru computer.
This option allows you to specify the file name for RTSP streaming thru mobile phone.
This option allows you to set a port other than the default UDP port .
The video channel port for RTP. It must be even number.
The video channel port for RTCP. It must be the port number of video RTP plus 1
The audio channel port for RTP. It must be even number.
The video channel port for RTCP. It must be the port number of video RTP plus 1.