Using & Configuring The Dcs-2120 With A Nat Router - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Security
Using & Configuring the DCS-2120 with a NAT Router
D-Link's DCS-2120 is a versatile and cost effective Network camera offering both video and audio monitoring. It can
also serve as a powerful surveillance system in security applications. The DCS-2120 can be used with any wired or
802.11b/g wireless router. This section explains how to view the camera from either the Internet or from inside your
internal network.
Materials Needed:
• 1 DCS-2120 Network camera
• 1 Ethernet Cable
• A Wired or Wireless router such as the D-Link DIR-655 Wireless Router
• Ethernet based PC for system configuration
Setting up the DCS-2120 for Use Behind a Router
Installing a DCS-2120 Network camera on your network is an easy 4–step procedure:
1 Assign a Local IP Address to Your Network camera
2 View the Network camera Using Your Internet Explorer Web Browser
3 Access the Router with Your Web Browser
4 Open Virtual Server Ports to Enable Remote Image Viewing
This section is designed to walk you through the setup process for installing your camera behind a router and enable
remote video viewing. For the basic setup of the DCS-2120, follow the steps outlined in the Quick Installation Guide.
D-Link DCS-10 User Manual 11