Related Manuals for V-Tec AT16/C5
Summary of Contents for V-Tec AT16/C5
- Page 1 ENGLISH VIDEO INTERCOM SYSTEM AT16/C5-AT16 USER MANUAL TALK MONITOR MENU VERSION 1.0...
- Page 2 Precautions ● Slots or openings in the back of the monitor, are provided for ventilation and to ensure reliable operation of the video monitor or equipment and to protect if from overheating. These openings must not be blocked or covered. The monitor should never be placed near or over a radiator or heat register and should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
-
Page 3: Table Of Contents
Contents 1. Parts and Functions ............... 1 2. Basic Door Release Operation ............2 3. Intercom Function ................. 2 4. Basic Setup Instructions ..............3 4.1 How to Enter Main Menu Page ..........3 4.2 Ring Tone Settings ..............3 4.3 NO Disturb Mode .............. -
Page 4: Parts And Functions
1. Parts and Functions TALK MENU MONITOR AT16 hasn’t this terminal. AT16 or C5-AT16 back view Key Functions ● ● 1. Microphone Receives●sound●from●the●user. ● ● 2. LCD screen Display●the●images●from●outdoor●station.Touch●operation. ● ● Normally●light●on●when●power●on 3. LED indicator ● ● Flash●when●receiving●signal●or●activating●No●disturb●mode ● ● 4. -
Page 5: Basic Door Release Operation
2. Basic Door Release Operation 1. Input room numbers in Door Station of the building or main entrance, the Monitor rings, at the same time, the screen displays the visitor image. TALK 2. Press Button on monitor, you can talk with the visitor for 70 seconds. During TALK communication, press Button again... -
Page 6: Basic Setup Instructions
Intercom Call : you can call the other users in the same network with you. Input the building code and room number by using ▲ / ▼ Button to increase / decrease the value; use Button to select next digit; Talk After finish, press Button to active the calling,... -
Page 7: No Disturb Mode
4.3 NO Disturb Mode If you don't want to be disturbed (for example, at night), set this item is on(use button to choose on/off), any call from the outdoor station will be sent to the guard center, and the guard person will tell the visitor that you do not want to accept the visit. 4.4 Date and Time Setting 1. -
Page 8: Restore To Default
4.6 Restore to Default Information... According to 4.4 , select item, this item Hardware Ver. A1.2 hardware/software will show the version and voltage Software Ver. V8.9 Restore to default information of the Monitor. Select Voltage 25.6 Manufacture AT16 MENU item ,then press button. -
Page 9: Defense Alarm Operation(Optional)
6. Defense Alarm Operation(optional) This system have auto-alarm function to ensure the security for the house owner. Total 4 different sensors were placed to protect different defense area. When the sensor was triggered, the monitor will sent out alarm sound immediately and will sent the alarm signal to the guard center at the same time. -
Page 10: Remote Control Function(Optional)
Out-Delay Period: after you arm the system, you will get into Out Delay Period, monitor will sent out short “Di” every 3 seconds; you will hear a long “Di~” at the end of the Out Delay Period, and the system is gotten into the protecting status. -
Page 11: Specifications
NOTE: 1. Remote control distance is normally up to 30 meters, and will extend if the built-in telescopic antenna is taken out. 2. If the controlled distance is becoming shorter, or LED doesn't light on while pressing any button, open the remote control unit and replace the battery with a new one. 8. - Page 12 Please read this manual carefully before using the product you purchase, and keep it well for future use.We reserve the right to modify the specification in this manual at any time without notice. VERSION 1.0...