1. Parts and Functions Digital TFT LCD Screen Menu Button Talk/MON Button Unlock Button Microphone Mounting Hook Connection Port Speaker Key functions LCD screen Display the visitors' image Unlock button Press to release the door Menu button Press to open the menu shortcuts Talk/Mon button Press to communicate hands free with visitor Press to view the outdoor condition in standby mode...
2. Monitor Mounting 1. Use the screws to fix the Mounting Bracket on the mounting box.(fitting accesories includes a Bracket (Two pieces of 4X25 screws are needed for fastening the Mounting Bracket), Special 2 wire connectors to connect with Monitor) 2.
4. Basic Door Release Operation 1. Press CALL button on outdoor station, the DS-1 00:30 Monitor rings, at the same time, the screen displays the visitors' image. 2. Press TALK/MON Button on monitor or touch icon on screen, you can communicate hands free with the visitor for 90 seconds.After TALK/MON button again or touch finishing communication,press...
5. Intercom Function : User in one apartment can call other apartments in the Intercom by namelist system. Touch item on main menu page , then touch Intercom Intercom icon (the namelist will be created automatically by the system). Select a by Namelist name on the screen then touch icon to call.Press...
Picture Playback Touch Memory Playback icon on main menu, the recorded pictures will be played on full screen, please note that the recorded pictures can not be deleted on monitor directly. 7. Staircase Light Note: the staircase light function will be activated only when the system connect light via SC6M module, otherwise, this function is unvalid in normal.
Ring Volume and Night Ring Volume Setting You can set a ring volume for day time and night time individually, 6:00 AM~18:00 PM is the day time and 18:00 PM~6:00 AM is the night time by default,if you don't want to be disturbed at night,you can set the night ring volume to 0.
Screen and Volume Adjustment Adjust icon,the Adjust page will be During monitoring or talking state, touch displayed. 1. The Scene mode selection: Total 4 screen modes can be selected in sequence: Normal, Whenever you modify User, Soft Bright. Brightness colour, Scene item will be set to mode automatically.
Page 9
How to set the monitor as a Guard Monitor A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor answers the call, conversation with the guard person is started.. The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is used to cancel this function.
How to set the unlock parameter Unlock mode: There are two unlock modes: 1.power-on- to-unlock type:unlock mode=0(by default) 2.power-off-to-unlock:unlock mode=1. The code number of 8010 is used to set the unlock mode to 0 The code number of 8011 is used to set the unlock mode to 1 Unlock time: The unlock time can be changed by yourself at any time.it can be set from 1 to 9 seconds.
10. Specification ● ● Power●supply●for●indoor●monitor:●● ● DC●24V● ● ● Power●consumption:● ●● Standby●38.4mA;●Working●320mA ● ● Monitor●screen:● ● 7●Inch●digital●color●LCD ● ● Display●Resolutions:● ● 800*3(R,●G,●B)●x●480●pixels ● ● Video●signal:● ● 1Vp-p,●75Ω,●CCIR●standard ● ● Wiring:● ● 2●wires,●non-polarity ● ● Dimension:● ● 139(H)×212(W)×15(D)mm 11. Precautions 1) All components should be protected from violence vibration. And not allow to be impacted, knocked and dropped.
Page 12
DT-ENG-37TD7-V1 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.