Getting Started - Vax W87-RP-C User Manual

PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Assembling your carpet washer handle
CAUTION: The carpet washer is a very powerful unit. Before plugging the cord into the electric outlet, make sure all controls on the unit are turned
off. Hold the carpet washer firmly when starting and in use.
Assemble the mid section onto the base.
Assembling your tool caddy
Align tabs on tool caddy with
slots on midsection and snap
into place.
Assembling your hose
Slide the adapter end of the
hose into the left slot on the
lower tool caddy.
vax.co.uk
Insert two nuts into the recesses located
on the left and right sides of the base.
Hold the nuts in place and insert the two
medium length screws through the front
of the mid section and tighten.
Place nut into recess on tool
caddy and hold into place.
Lock the hose into place by
pressing down onto the post
until secure.

Getting Started

Slide the handle onto the unit. Insert
the nut into the recess in the back of
the handle. Hold the nut in place and
insert the long screw through the front
of the handle and tighten.
Press handle release and tilt
the midsection backwards.
Place screw through
the centre of the lower
midsection and tighten.
4