Power Supply; Input Connections; Input Impedance; Power Requirements - Emotiva XPR-2 User Manual

XPR-2

Power Supply:

2.5 kVA toroidal power transformer.
240,000 uF of storage capacitance.
Input Sensitivity (for rated power; 8 Ohm load):
2.6 V
Gain:
29 dB

Input Connections:

RCA; unbalanced (audiophile quality, machined, solid brass, gold plated); one per channel.
XLR; balanced; one per channel.

Input Impedance:

100k ohms (unbalanced).
51k ohms (balanced).
Trigger:
Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 50 mA.

Power Requirements:

115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (auto-switching).
Protection:
The XPR-2 is protected against excessive operating temperature, shorted speaker
connections, ground faults, and other common fault conditions. If a fault occurs on one or
more channels of the XPR-2, the LED above the Standby button, the Channel Status LEDs,
and the LED Bargraph Meter LEDs associated with the channel that is reporting the fault
will flash red. Returning the XPR-2 to Standby or switching off the AC Power will reset the
protection circuitry.
Dimensions:
17" wide x 9.5" high 19.5" deep (includes feet and binding posts);
requires additional 4" of depth clearance to accommodate the power cord.
Weight:
100 lbs (net); 114 lbs (boxed).
Page 17