Coin-Cell Battery - Dell Latitude D810 User Manual

Hide thumbs Also See for Latitude D810:
Table of Contents

Advertisement

1 screw
2 internal card with Bluetooth wireless technology
3 system board connector
3. Remove the screw.
4. Pull the card out of the system board connector.
5. Remove the card from the computer and set it aside.
6. Attach the new card to the system board connector.
NOTE:
The card and system board connector can only connect in one configuration. If you encounter resistance, check the configuration and try again.
7. Replace and tighten the screw.
8. Reattach the access door and gently press down on the latch until you feel a click.
9. Reinsert the battery.

Coin-Cell Battery

 
Your computer uses a coin-cell battery to maintain the date and time even while the computer is off. However, after several years, this battery may lose its
charge.
CAUTION:
Before working inside your computer, read the safety instructions in your Product Information Guide.
1. Follow the procedures in
"Before You
2. Remove the access door beneath the battery.
3. Slide the coin-cell battery out of the tabs that hold it in place.
4. Grasp the coin-cell battery connector cable and disconnect it from the coin-cell battery socket.
 
5. Connect the new coin-cell battery to the socket.
NOTE:
The coin-cell battery connector and socket can only connect in one configuration. If you encounter resistance, check the configuration and try
again.
6. Slide the coin-cell battery under the tabs that hold it in place.
7. Reattach the access door and gently press down on the latch until you feel a click.
8. Reinsert the battery.
Begin."

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents