Table of Contents
Advertisement
7-4-3 Software operation
[Remote viewer interface]
5.[Channel Selection ]
To select CAM1~16 when full or split screen display
6.[Connect ]
To select a DVR IP address from IP list for connection.
7.[Disconnect ]
To disconnect the DVR
8.[Playback ]
To enter playback
9.[Setup]
To enter the setup
10.[Power ]
To close the remote program. The connection to the DVR will break off after the remote software is closed.
11.[Transmission Rate]
To adjust transimission speed, range from 1~10, the bigger it is, the faster it is, and the image quality is
comparatively worse.
JPEG2000 Stand alone DVR User Guide
1.[Live Display]
2.[Current Status ]
3.[PTZ Camera Control ]
※ Remote Control of PTZ:
1) Set up PTZ at DVR first
2) Set up PTZ from the Client Software
4.[Screen Split ]
- 55 -
Remote DVR Live display
To show the current status
To control PTZ Camera
Zoom/Focus/Direction
To select Full/4/9/16 split screen display
Advertisement
Table of Contents
