Factory Default; Language - Hitachi JPEG2000 User Manual

[SPEED SETUP]

4-7 Factory default

1. The DVR cannot reset the password to default by running Factory Default.
2. It is strongly suggested to run Factory Default and HDD CLEAR when you install a new hard drive(s).

4-8 Language

JPEG2000 Stand alone DVR User Guide
Press to select and [+] / [-] to change the value.
1.[PAN SPEED]
Set the PANing speed.
2.[TILT SPEED]
Set the TILTing speed.
3.[ZOOM SPEED]
Set the speed of ZOOM IN/OUT.
4.[FOCUS SPEED]
Set the speed of FOCUS NEAR/FAR.
Press to select and ENTER to turn ON and OFF the selection. Move the cursor
to RUN and press ENTER to execute the Factory Default.
1.[ALL]
Set all the settings back to factory default.
2.[SCREEN DISPLAY]
Set "SCREEN DISPLAY" back to factory default.
3.[CAMERA COOLR SETUP]
Set "CAMERA COLOR SETUP" back to factory default.
4.[MOTION SETUP]
Set "MOTION SETUP" back to factory default.
5.[PANTILT SETUP]
Set "PANTILT SETUP" back to factory default.
6.[SCHEDULE SETUP]
Set "SCHEDULE SETUP" back to factory default.
7.[CONFIGUATION]
Set "CONFIGURATION" back to factory default.
Press [+] / [-] button to select a language.
- 42 -