Hints For Timer Recording - Hitachi DV PF74U Instruction Manual

Dvd/vcr combo (dvd player with video cassette recorder)
Hide thumbs

Advertisement

Table of Contents
4) Set the start time
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05 /12 WED
START TIME - - : - -
- -
First, press K or L for the hour.
END
TIME - - : - -
- -
CHANNEL
- -
Then, press B. Next, press K or L
REC SPEED - -
for the minute. Then, press B. And
then, press K or L for AM or PM. Then, press B.
5) Set the end time
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05 /12 WED
Follow the instructions of
START TIME 07: 30 PM
END
TIME - - : - -
- -
"Set the start time" to set
CHANNEL
- -
REC SPEED - -
the end time.
ONE TIME PROGRAM
6) Set the channel number
PROGRAM NUMBER 4
DATE
05 /12 WED
START TIME 07: 30 PM
Press K or L repeatedly for the
END
TIME 08: 30 PM
CHANNEL
- -
desired channel number. Then,
REC SPEED - -
press B.
If you connected the DVD/VCR to a cable box or satellite box
as in "DVD/VCR TO TV CONNECTION" on page 14, select
the DVD/VCR to channel 3 or 4 the same channel as RF
output channel of the DVD/VCR. Then, select the channel you
want to record on the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
7) Set the tape speed
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05 /12 WED
Press K or L repeatedly for the
START TIME 07: 30 PM
END
TIME 08: 30 PM
desired tape speed. Then, press B.
CHANNEL
16
REC SPEED SP
SP
SLP
5
To set another program, repeat step [4]. To
exit, press CLEAR/C.RESET.
6
Press TIMER to set the timer.
¡
The TIMER light on the DVD/VCR lights up, and
“REC” and “
” appear in the front panel display.
TIMER RECORDING WILL NOT BE ACTIVAT-
ED UNLESS YOU PRESS TIMER.
HINTS FOR TIMER
RECORDING
VCR
¡
If there is a power failure or the DVD/VCR is
unplugged for more than 30 seconds, the clock set-
ting and all timer settings will be lost.
¡
If a tape ends during timer recording, the DVD/VCR
will stop, eject the tape, and switch to the DVD
mode automatically as the TIMER light lights up on
the DVD/VCR and “REC” and “
” in the front
panel display flash. (If the DVD is not in use, the
VCR will be on STANDBY mode).
¡
If a tape is not in the DVD/VCR or does not have a
safety tab, the TIMER light flashes and timer recording
will not operate. Please insert a recordable tape.
¡
When all timer recordings are finished, the TIMER light
will flash. To use the DVD/VCR again as usual, press
TIMER to disable the flashing TIMER light, “REC”,
and “
”, then press VCR/TV to select the VCR posi-
tion. Select either VCR or DVD mode, then continue
with the other features as described in this manual.
¡
When timer recordings are set, the TIMER light will
light up, and “REC” and “
” will appear in the
front panel display. To use the DVD/VCR as usual
until the time of the recording, press TIMER so that
the TIMER light turns off and “REC” and “
” dis-
appear. Press VCR/TV to choose the VCR position.
Select either VCR or DVD mode, then continue with
the other features as described in this manual.
If you want to use the DVD player during a
timer recording or while the TIMER light,
“REC” and “
” are on or flash.
¡
You can use the DVD player while the TIMER light,
“REC” and “
” are on or flashes, or during a timer
recording. Press y/I to turn on the DVD/VCR.
Press DVD on the remote control to choose DVD
mode, then continue with the other DVD features as
described in this manual. You don’t have to set the .
TIMER off to use the DVD only.
TO STOP AN AUTOMATIC TIMER PRO-
GRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR.
TO CHECK, CORRECT, OR CANCEL AN
AUTOMATIC TIMER PROGRAM
1
Press TIMER.
¡
If the power of the DVD/VCR is off, press y/I
instead of TIMER, then go on to the next step.
¡
If the DVD output mode is selected, you have to
switch it to the VCR mode by pressing the VCR on the
remote control or the OUTPUT on the DVD/VCR.
2
Select main menu by pressing MENU.
3
Select "TIMER PROGRAMMING" by press-
ing K or L. Then, press B.
4
Select the program number you want to
check by pressing K or L.
¡
The details of the selected program appears on the
TV screen.
¡
Go to the digit you want to change by pressing B or
s. Then, enter correct numbers by pressing o or p.
¡
You may cancel the entire program by pressing s
while the program number flashes.
5
Press CLEAR/C.RESET to exit.
6
Press TIMER to return to timer stand-by
mode.
EN
Page 20
1L25

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Hitachi DV PF74U

Table of Contents