Manage The Gateway - Cisco DPC3827 User Manual

Manage the Gateway

Manage the Gateway
Administration > Management
The Administration Management page allows the network's administrator to
manage specific gateway functions for access and security. Select the Management
tab to open the Administration Management page.
Important: The following page displays when DHCP (factory default) is the
Connection Mode. The page that displays when Static IP is selected is shown and
described later in this section.
Administration Management Page Description
Use the descriptions and instructions in the following table to configure the
administration management for the residential gateway when DHCP or Static IP
connection mode is selected. After you make your selections, click Save Settings to
apply your changes or Cancel Changes to cancel.
Field
Gateway Setup
(WAN)
56
Description
Connection Mode: This setting allows you to determine how the
WAN (or gateway interface to the Internet) obtains its IP address.
4025083 Rev A