Front Panel Description - Cisco DPC3827 User Manual

Front Panel Description

The front panel of your residential gateway provides LED status indicators that
indicate how well and at what state your residential gateway is operating. See Front
Panel LED Status Indicator Functions (on page 106), for more information on front
panel LED status indicator functions.
Model DPC3827 shown here
1 POWER—ON, power is applied to the wireless residential gateway
2 DS—ON, the wireless residential gateway is receiving data from the cable
network
3 US—On, the wireless residential gateway is sending data to the cable
network
4 ONLINE—ON, the wireless residential gateway is registered on the
network and fully operational
5 ETHERNET 1 - 4—ON, a device is connected to one of the Ethernet ports.
BLINKING indicates that data is being transferred over the Ethernet
connection
6 USB—ON, a device is connected to the USB port. BLINKING indicates that
data is being transferred over the USB connection
7 WIRELESS LINK—ON, the Wireless Access Point is operational.
BLINKING indicates that data is being transferred over the wireless
connection. OFF indicates that the wireless access point has been disabled
by the user
8 WIRELESS SETUP—OFF (normal condition) wireless setup is not active.
BLINKING indicates the user has activated wireless setup to add new
wireless clients on the wireless network
9 MoCA—ON, the MoCA is operational. BLINKING indicates that data is
being transferred over the MoCA connection. OFF indicates that the MoCA
has been disabled by the user or that the device is not connected to the
MoCA network
4025083 Rev A
Front Panel Description
15