Cisco DPC3827 User Manual page 107

4 ONLINE
5 ETHERNET
1-4
6 USB
7 WIRELESS
LINK
8 WIRELESS
SETUP
9 MoCA
Normal Operations (AC Power applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
1 POWER
2 DS
3 US
4 ONLINE
5 ETHERNET
1 - 4
6 USB
7 WIRELESS
LINK
8 WIRELESS
SETUP
4025083 Rev A
On
On or Blinking
On or Blinking
On or Blinking
Off
On or Blinking
Normal Operations
On
On
On
On

On - When a single device is connected to the Ethernet port and
no data is being sent to or from the modem

Blinks - When only one Ethernet device is connected and data is
being transferred between the consumer premise equipment
(CPE) and the wireless home gateway

Off - When no devices are connected to the Ethernet ports

On - When a single device is connected to the USB port and no
data is being sent to or from the modem

Blinks - When only one USB device is connected and data is
being transferred between the consumer premise equipment
(CPE) and the wireless home gateway

Off - When no devices are connected to the USB ports

On - When the wireless access point is enabled and operational

Blinks - When data is being transferred between the CPE and
the wireless home gateway

Off - When the wireless access point is disabled by the user

Off - When wireless setup is not active

Blinks - When wireless setup is active to add new wireless
clients on the wireless network
Front Panel LED Status Indicator Functions
107