Cisco DPC3827 User Manual page 44

How Do I Configure My DOCSIS Residential Gateway?
Section
Buttons
View Log
The Security VPN View Log page shows events captured by the firewall. The log
displays the following items:
Description of the event

44
Field Description
Connect
Click this button to establish a connection for the current VPN
tunnel. If you have made any changes, click Save Settings to first
apply your changes.
Disconnect
Click this button to break a connection for the current VPN tunnel.
View Log
Click this button to view the VPN log, which shows details of each
established tunnel.
Advanced Settings
If the Key Exchange Method is Auto (IKE), this button provides
access to additional settings relating to IKE. Click this button if the
gateway is unable to establish a VPN tunnel to the remote gateway,
and make sure the Advanced Settings match those on the remote
gateway.

Phase 1 - Operation Mode
Select the method appropriate for the remote VPN endpoint.
– Main: Main mode is slower but more secure
– Aggressive: Aggressive mode is faster but less secure

Local Identity
Select the desired option to match the Remote Identity setting at
the other end of this tunnel.
– Local IP Address: Your WAN (Internet) IP address
– Name: Your domain name

Remote Identity
Select the desired option to match the Local Identity setting at
the other end of this tunnel.
– Local IP Address: WAN (Internet) IP address of the remote
VPN endpoint
– Name: Domain name of the remote VPN endpoint.

Encryption
This is the Encryption algorithm used for the IKE SA. It must
match the setting used at the other end of the tunnel.
4025083 Rev A