Chapter 5 Powering On The Cisco Vg350 Voice Gateway; Checklist For Power-On; Power-On Procedure - Cisco VG350 Installation Manual

Powering On the Cisco VG350 Voice Gateway
To power on your Cisco VG350 Voice Gateway, perform the following tasks in the order listed, as
required:
•
•
•

Checklist for Power-On

You can power on a Cisco VG350 Voice Gateway if it meets the requirements described in
Chapter 4, "Installing the Cisco VG350 Voice
•
•
•

Power-On Procedure

Perform this procedure to power on your Cisco VG350 Voice Gateway, and verify that it goes through
its initialization and self-test. When this is finished, the Cisco VG350 Voice Gateway is ready to
configure.
This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
OL-25970-01
Checklist for Power-On, page 5-1
Power-On Procedure, page 5-1
Troubleshooting, page 5-3
The chassis is securely mounted.
Power cable is connected.
Interface cables are connected.
C H A P T E R
Gateway":
Cisco VG350 Voice Gateway Hardware Installation Guide
5
5-1