Replacing The Hard Drive; Memory Module - HP Pavilion g6 Maintenance And Service Manual

4. Remove the 4 PM 3.0 x 3.5 screws (4), and then remove the bracket (5) from the hard drive.

Replacing the hard drive

Reverse this procedure to reassemble and install the hard drive.

Memory module

WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
NOTE:
To use a dual-channel configuration with a second memory module, be sure that both memory
modules are identical.
Description
4 GB (PC3, 12800, 1600 MHz)
2 GB (PC3, 12800, 1600 MHz)
Before removing a memory module, follow these steps:
CAUTION:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep/Suspend state, or in Hibernation.
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
ENWW
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning any
To prevent information loss or an unresponsive system:
Spare part number
641369-001
652972-001
Component replacement procedures
47