Table of Contents
Advertisement
Replacing the hard drive
CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then, shut down the computer through the operating system.
To remove a hard drive:
1.
Save your work.
2.
Shut down the computer and close the display.
3.
Disconnect all external hardware devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the hard drive bay toward you.
6.
Remove the battery from the computer.
7.
Loosen the bottom door screws (1).
8.
Slide the bottom door forward (2), and then lift it away from the computer (3).
NOTE:
9.
Remove the 2 screws securing the rear of the drive (1).
Downloaded from LpManual.com Manuals
To prevent information loss or an unresponsive system:
Refer to the illustration that most closely matches your computer.
Replacing the hard drive
79
Advertisement
Table of Contents
Troubleshooting
