Basic Operation Instruction; Power On; Standby; Signal Source Selection - Haier LE22K800 Owner's Manual

Basic Operation Instruction

Power On

Plug power cord into the electrical socket, press ''
panel, or press ''POWER'' key on the remote control to turn on the TV.

Standby

Press ''Power''key on the remote control. TV will be in standby.
★Special Attention:
1. TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on.
2. TV set will automatically turn to standby when the preset time of turning off reaches.
3. If you do not use it for a long time, please turn off the power supply for the machine. Do not let the machine work in
standby state for a long time.

Signal Source Selection

Press ''SOURCE'' key either on the remote control or on the control panel. ''Input Source'' will be
displayed on the screen. Then press ''Up/Down'' key on remote control or "CH+/CH-" key on the
control panel to choose the signal source. Press ''OK'' key on the remote control or ''MENU" key on
the control panel and TV will switch the current signal source to the signal source you choose.

Menu Operation Instruction

Press ''MENU'' key on the remote control or on the control panel, then the TV will display the main menu.
1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-'' key on the control panel to select the adjustment sort
menu, which includes 4 sorts:
2. Press ''Down''key on the remote control or ''CH-'' on the control panel to enter the adjustment sort menu.
'' button on the control panel, then press ''
PICTURE, SOUND, OSD, TV.
12
'' key on the control
Input Source
TV
AV1
AV2
S-VIDEO
YPbPr
PC
HDMI1
HDMI2
HDMI3
USB