Picture - Haier LE22K800 Owner's Manual

3. Press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the control
panel to select what is needed to adjust in sort menu.
4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-'' on the
control panel to adjust the value or setting.
5. Press ''Menu'' key to exit the main menu when the TV displays the Main
Menu; Press ''Menu'' key to return to previous menu when the TV
displays the submenu; Press ''Source''key to display the signal source
menu or exit signal source menu.
6. During the operation, the selections which can not be adjusted at current
mode will be hidden automatically and the color of the selections will be
changed into gray.
7. Menu Operation Instruction in this manual is explained according to TV mode. The operations in other modes are
similar to the one in TV mode. Users can take it as reference.

PICTURE

Select to enter the PICTURE submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the control
panel to choose what you need. Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key on the control
panel to adjust analog value or state (see below table).
★Special Attention
1. The Hue function is available only for NTSC system.
2. The value adjusted by user, such as Contrast, Brightness, Saturation, Hue, and Sharpness will be saved
automatically by the machine as personal mode.
★Remote Control Shortcut Keys
SMART P: Press SMART P key on the remote control. You can switch the function among the "Standard", "Soft", "User",
"Bright" four modes.
16:9: Press 16:9 key on the remote control, you can switch the mode among the "Full, "4:3", "Subtitle", "Film" four modes.
Picture Mode
Contrast
Brightness
Saturation
Hue
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Adjust
13
Soft
48
48
50
50
55
Full
Standard
Off
Select Menu:Exit