5. Hang the machine onto the slot of the wall mounting board. Then lock the two bolts on the sides.
Note:
Installation method is different because of Hanging arm hardware's
●
Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or vehicles.
●
Panel Control Keys
1
2
1. Remote Receiving Sensor.
2. Power Indicator.
3.
Power switch.
4. SOURCE: Press this key to enter the menu of signal source and choose signal source.
5. CH+/CH-: Press these two keys to choose channel, and adjust the options you need under OSD operation.
6. VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the analog value under OSD operation.
7. MENU: Press this key to enter main menu.
8.
Power on/Standby .
Note: There are some apparent differences between modes, please according to practicality.
4
5
6
7
8
3
9
structure
.
3