Basic Operation - Haier L40F1180 Owner's Manual

Basic Operation

Basic Operation
Power on/off
1. Connect the TV to a wall outlet using the included AC power cord.
2.-To turn on the TV
Press the POWER button on the TV or remote control.
-To turn off the TV
Press the POWER button on the TV or remote control.
Input Source select
Press the INPUT button on the remote control to display
the input source menu, and use the
the remote control to select the input source. Press the ENTER
button on the remote control to switch to the selected input.
Note: Before you select the input source, make sure the
connections are properly connected.
Basic OSD Menu operation
Press the MENU button to display the OSD menu as shown below:
Use the / buttons to select the main menu, and press the
In the submenu, use the
Adjust ("Contrast" shown in above example with the
Select ("Picture Mode" as shown in above example ) with the
Enter the submenu ("Close Caption" item in Setup menu for example) with
* (Press the MENU button to return to the upper menu.)
* (Press the EXIT button to exit the menu display.)
Note1: Some options can only be accessed in certain modes.
14
/ buttons on
/ buttons to select the function item.
Main menu
Picture, Audio, Time, Setup, Lock, Channel
Submenu
(Picture menu shown as an example)
Buttons
Use the buttons listed here to navigate the
OSD menu.
button to enter the submenu.
/ buttons;
/ buttons;
INPUT SOURCE
TV
AV
Component
HDMI1
HDMI2
HDMI3
VGA
USB
button.