Table of Contents
Advertisement
Measurement Using the TriCheck Mode
1.
Press the
START
All of the display segments are
displayed.
Zero (0) is displayed blinking briefly
and the first measurement starts.
2.
When the measurement is complete,
the systolic and diastolic pressure
readings and pulse rate are displayed,
then a one-minute countdown starts for
the second measurement.
3.
After one minute, the second
measurement starts.
4.
When the measurement is complete,
the average readings of the first and
second measurements are displayed,
then a one-minute countdown starts for
the third measurement.
5.
After one minute, the third
measurement starts.
6.
When the measurement is complete,
the average readings of the three
measurements are displayed and
stored in memory.
Notes:
During
the
TriCheck symbol is displayed.
To cancel the measurement, press
the START button. In this case, no
data is stored in memory.
When the cuff fit error symbol appears
during the first measurement, cancel
the measurement, reapply the cuff
correctly and start a new measurement.
After measurement, the average
data of the three measurements is
stored in memory.
No data will be stored, when
canceling
the
before completion of the third
measurement.
button.
measurement,
measurements,
START
One minute after
One minute after
the
English 13
At heart level
Press
All of the display
segments displayed
First measurement
Results of the
first measurement
Second measurement
Average of the first and
second measurements
Third measurement
Average of the
three measurements
Advertisement
Table of Contents
