Remote Access Code; Message Alert Tone - VTech CS6199-4 User Manual

Answering system settings

Remote access code

A two-digit security code is required to access the answering system remotely from
any touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
to scroll to Remote code, then press SELECT.
4. Press or
5. Use the dialing keys (0-9) to enter a two-digit number,
or press or
Then press SELECT to confirm your selection. You hear a
confirmation tone.

Message alert tone

When the message alert tone is set to on, and there is at least one
new message, the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
to scroll to Msg alert tone, then press SELECT.
4. Press or
5. Press or to choose Tone: On or Tone: Off, then press
SELECT to confirm your selection. You hear a confirmation tone.
• The answering system must be turned on for the message alert
tone to be functional.
• Press any key on the telephone base (except ) to temporarily
silence the message alert tone.
to scroll to a desired two-digit number.
44
Ans sys setup
ECO
ANS ON
Remote code
ECO
ANS ON
Remote code
19
ECO
ANS ON
Ans sys setup
ECO
ANS ON
Msg alert tone
ECO
ANS ON
Tone: Off
ECO
ANS ON