Table of Contents
Advertisement
Chapter 5 Wireless
Open system is implemented for ease-of-use and when security is not an issue. The wireless station
and the AP or peer computer do not share a secret key. Thus the wireless stations can associate
with any AP or peer computer and listen to any transmitted data that is not encrypted.
Shared key mode involves a shared secret key to authenticate the wireless station to the AP or peer
computer. This requires you to enable the wireless LAN security and use same settings on both the
wireless station and the AP or peer computer.
In order to configure and enable WEP encryption, click Network Settings > Wireless to display
the General screen. Select Basic as the security level. Then select Static WEP or Shared WEP
from the Security Mode list.
Figure 21 Wireless > General: Basic (Static WEP/Shared WEP)
The following table describes the labels in this screen.
Table 11 Wireless > General: Basic (Static WEP/Shared WEP)
LABEL
Security Mode
WEP Key
46
DESCRIPTION
Choose Static WEP or Shared WEP from the drop-down list box.
•
Select Static WEP to have the LTE Device allow association with wireless clients that
use Open System mode. Data transfer is encrypted as long as the wireless client has the
correct WEP key for encryption. The LTE Device authenticates wireless clients using
Shared Key mode that have the correct WEP key.
•
Select Shared WEP to have the LTE Device authenticate only those wireless clients that
use Shared Key mode and have the correct WEP key.
Enter a WEP key that will be used to encrypt data. Both the LTE Device and the wireless
stations must use the same WEP key for data transmission.
LTE6101 User's Guide
Advertisement
Table of Contents
