D-Link Storage Utility - D-Link ShareCenter Shadow DNS-325 User Manual

Section 2 - Getting Started
When first powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via
DHCP. If it does not receive a DHCP assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to
the ShareCenter. It is recommended that the included D-Link Storage Utility be used when accessing and configuring
the ShareCenter for the first time. If you want to change the IP address before logging in or are unable to connect to
the ShareCenter IP address, you can use the Storage Utility provided on the product CD to locate the device on your
network and make any needed changes.
The D-Link Storage Utility displays any
Network
ShareCenter™ devices it detects on the
Storage Device
network here.
Click Refresh to refresh the device list.
Refresh
Click Configuration to access the Web based
Configuration
configuration of the ShareCenter™.
C o n f i g u r e t h e L A N S e t t i n g s f o r t h e
LAN
ShareCenter™ here.
Click Apply to save changes to the LAN
Apply
Settings.
Click Connect to connect to the iSCSI target.
Connect
Click Management to edit the information.
Management
Volumes available for mapping are displayed
Drive Mapping
here.
Choose an available drive letter. Click Connect
Available Drive
to map the selected volume. Click Disconnect
Letters
to disconnect the selected mapped volume.
Click About to view the software version of the
About
Easy Search Utility.
Click Exit to close the utility.
Exit
D-Link ShareCenter Shadow DNS-325 User Manual

D-Link Storage Utility

7