Memory - Hitachi VM-1600A Instruction Manual

MEMORY

MEMORY
When the tape counter with memory indication appears in the viewfinder, a tape that is
being rewound automatically stops when the counter reads approximately "0:00:00".
This is useful if there is a section of tape you want to review immediately after recording
or if you want to return to the same point several times in a row.
1. Press "DISPLAY" button until the linear time counter is displayed.
2. Press "MEMORY" button. (The indicator "M" appears beside the linear time counter.)
3. Start playing or recording a tape.
4. At the point you want playback to start, press "RESET/T-160/T-180" button to reset
the counter to "0:00:00".
5. Continue to play back or record.
6. Press "STOP" button.
6. Press "REW" button. The tape will be rewound to the preselected point, at
approximately "0:00:00" indication.
NOTE: The tape will also stop approximately at "0:00:00" during fast forward mode.
75