Hitachi VM-1600A Instruction Manual page 70

VIDEO DUBBING
approximate area on the tape where you want to begin your dub.
4. Press "PLAY" button again to search for the exact position that you want to stop
dubbing, then press "STILL (REC/PAUSE)" button.
5. Press "DISPLAY" button so that the linear timer counter appears and then press
"RESET/T-160/T-180" button to set the counter reading to "0:00:00".
6. Press "MEMORY" button so that the counter memory "M" appears.
7. Press "REW" button to rewind the tape to the approximate area that you want to start
dubbing.
8. Press "PLAY" button, and when the exact position that you want to start to dub is
reached, press "STILL (REC/PAUSE)" button.
9. Press "VIDEO DUB" and "PLAY" buttons simultaneously. "V.DUB" appears in the
viewfinder, and at the same time the picture to be dubbed appears.
10. Press "STILL (REC/PAUSE)" button.
Video dubbing will start and will stop when the counter reads "0:00:00".
6. Press "STOP" button to stop audio dubbing.
70