Hitachi VM-1600A Instruction Manual page 87

Hitachi instruction manual video camera/recorder vm-1600a, vm-2600a
Table of Contents

Advertisement

TROUBLESHOOTING
The "
" indication in the electronic viewfinder
the flashes to indicate battery is discharged
.
RECORDING TV PROGRAMS OFF THE AIR
Symptom
The camera/recorder can not go into the recording
mode, even when record start/stop button is pressed. prevention tab removed. Stick a
SYMPTOM
"PLAY" button cannot be engaged.
No picture appears on television
screen when "PLAY" is pressed.
Interference on playback picture.
PLAYBACK OF PRE-RECORDED CASSETTE
Check Point & Correction
piece of cellophane tape over
erase prevention tab hole or select a
different cassette.
*Set "POWER" switch to "CAM"
position.
*Connect the camera/recorder and
TV (orVCR).
CHECK POINT & CORRECTION
Set the "POWER" switch to
"VIDEO" position.
Set the television to the
camera/recorder channel (3 or 4)
depending upon the selected
channel on the RF channel select
switch of the RF converter unit. (TV
is connected to the camera/recorder
by using converter unit.)
Adjust the tracking using
"TRACKING" control (power zoom
switch).
When you see the playback picture
on your TV, adjust fine tuning knob
on television set to obtain best
picture.
The pre-recorder tape is EP on LP
recording. This camera/recorder is
*Try another battery or charge
battery.
*The cassette has had the erase
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-2600a

Table of Contents