Time Remaining - Hitachi VM-1600A Instruction Manual

TIME REMAINING

TIME REMAINING
When the linear time counter is present in the viewfinder, pressing "DISPLAY" button
again will change the display to a read-out showing the amount of recording or playback
time left on the tape. Pressing "DISPLAY" button once more clears all graphics from the
viewfinder.
NOTE: When using an extended length T-160 or T-180 cassette, you must press
"RESET/T-160/T-180" button to adapt the camera/recorder's time remaining system for an
accurate read-out. (If the counter is being displayed, "RESET/T-160/T-180" button resets
the counter to "0:00:00:".)
54