Program; What Is "Program; Switching To Thumbnail Display Of Specific Date (Select) - Hitachi DZ-HS300A Instruction Manual

Program

WHAT IS "PROGRAM"?

Program refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
Scene No. 1
9:00AM Movie
Movie

SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)

Since the scenes recorded on this DVD video camera/recorder are collected as "programs" for each
recording date, selecting a program will allow you to display only the scenes on a specific date.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the f/e/d/c/A buttons to
choose "Select" on the "Program" menu
screen, and then press the A button.
4
Select the program to
be displayed, and then
press the A button.
The Disc Navigation
screen of the selected
program will appear.
Scene No. 2 Scene No. 3
10:20AM Still
Program No. 1
Recorded on December 20
S e l e c t P r o g r a m
A l l P r o g r ams
0 1 1 2 / 1 / 2 0 0 6
0 2 1 2 / 1 0 / 2 0 0 6
0 3 1 2 / 2 0 / 2 0 0 6
ENTER RETURN
0 3 12/ 2 0 / 2006 0 01 / 008
PLAY PHOTO SELECT
Scene No. 4
Still
11:45AM 1:30PM Movie
1<>2/
HDD HDD
:
Note
• Pressing the C button on the "Select Program" screen
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the program may not be
a collection of recordings on the same date.
• If you change the video quality or switch the wide
mode with a +RW, multiple programs will be produced
even if they are recorded on the same date.
Scene No. 5 Scene No. 6
5:20PM Still 8:00PM
95