Viewing Images Recorded On Disc Using Pc - Hitachi DZ-HS300A Instruction Manual

Viewing Images recorded on Disc using PC

●Playing back DVD-RW (VF-mode)/DVD-R/+RW
You can use the DVD playback software on your PC/Macintosh to play back a DVD-RW (VF-
mode)/DVD-R/+RW recorded and finalized on this DVD video camera/recorder.
1. Load the DVD-RW (VF-mode)/DVD-R/+RW to be played back in the DVD video camera/
recorder.
2. Connect the DVD video camera/recorder to a USB port of PC/Macintosh.
3. Start up the DVD playback software on your PC/Macintosh and play back.
:
Note
• When connecting the DVD video camera/recorder to Macintosh for playback on a DVD playback software, etc.,
the screen for setting the drive region code will appear: Set the region code that matches your local area.
●Playing back DVD-RAM/DVD-RW (VR-mode)
A DVD-RAM/DVD-RW (VR-mode) recorded on the DVD video camera/recorder cannot be played
back, since the OS is not compatible with its playback. Use the provided software to play back the
disc.
●Playing back MPEG files imported by Pixe VRF Browser EX (Mac OS
only)
You can play back MPEG files imported into PC using Pixe VRF Browser EX, on the playback check
screen of ImageMixer VCD/DVD2, after registering them on ImageMixer VCD/DVD2.
Since the audio format of the MPEG file imported into Macintosh using Pixe VRF Browser EX is AC3
audio, no audio will be played back even on QuickTime MPEG-2 playback component and only
video is played back.
:
Note
• Normal playback may not be possible depending on the disc recorded status.
135