Hitachi DZ-HS300A Instruction Manual page 143

Message
DVD-R*, Input Source
cannot be changed.
DVD-R*, Video mode
and 16:9 mode cannot
be changed.
DVD-RAM, Finalize is
not required.
END OF CARD
Error occurred. Please
format HDD.
Error occurred. Please
replace DVD or format
DVD.
Error occurred. Please
replace DVD.
Finalize may not be
complete. Finalize again
now?
HDD/DVD ALMOST
FULL
HDD full.
Cannot execute.
HDD/DVD has no data.
HDD/DVD has no
PlayList.
HDD/DVD includes
protected scenes.
Delete scenes?
HDD/DVD is full.
Cannot add control info.
HDD error has
occurred.
HDD error has
occurred.Format the
HDD now?
HDD error has
occurred.Formatting is
not complete.
Cause & Troubleshooting
Once a DVD-RW (VF-mode)/DVD-R has been recorded in the
16:9 mode, the input source will not be changeable.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
With DVD-RW (VF-mode)/DVD-R, the movie quality mode and
16:9 mode once used for recording cannot be changed.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
This message will appear if you press the FINALIZE button with a
DVD-RAM loaded in this DVD video camera/recorder. No
finalization is necessary for a DVD-RAM.
No more recording on this card can be done: Delete unnecessary
stills or use another card.
An error occurred with the HDD for which repair is being tried.
Initialize the HDD: But note that initializing the HDD will delete all
data stored on the HDD.
• Abnormality has occurred with the DVD-RAM/DVD-RW/+RW
to be repaired. Initialize the disc before using it, or use the
another disc. Initializing the disc will erase all data on it.
• See *2 on page 145.
An abnormality occurred with a DVD-R to be repaired. Replace
the disc.
This message will appear when power is supplied again and the
disc is reinserted after power was shut off during finalization due
to a power failure, etc. Choose "YES" if you wish to be sure
finalizing is performed.
The remaining free space of HDD/disc is less than one minute for
video: Delete unwanted scenes, or use another disc.
Delete unwanted scenes.
This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Switching of play list was selected with no play list stored.
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
Initialize the HDD before using the DVD video camera/recorder.
Initializing the HDD will delete all data recorded on it.
Did you interrupt formatting the HDD?
Choose "YES", and then format the HDD.
Initializing the HDD will delete all data recorded on it.
Did you interrupt formatting the HDD?
Press the RESET button to execute system reset.
Reference
page
66
66
108
85, 157
105
105
—
108
85, 156
85
—
99
—
85, 87
105
105
153
143