Whirlpool 240-VOLT ELECTRIC DRYER Use & Care Manual page 22

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.maytag.com/product_help -
If you experience
Dryer Results (cont.)
Stains on load
Stains on drum
Loads are wrinkled
Odors
Load too hot
22
for assistance and to possibly avoid a service call.
Possible Causes
Improper use of fabric softener.
Loose dyes in clothes.
The load was not removed from
dryer at the end of the cycle.
The dryer was tightly packed.
Recent painting, staining, or
varnishing in the area where your
dryer is located.
Load removed before cool down
portion of cycle complete.
Using Timed Dry cycle with a
normal temperature setting.
Add dryer fabric softener sheets at the beginning of the cycle.
Fabric softener sheets added to a partially dried load can
stain your garments.
Drum stains are caused by dyes in clothing (usually blue
jeans). These will not transfer to other clothing.
Refer to garment care label instructions. Dry clean only
garments are not recommended.
Dry smaller loads that can tumble freely.
Ventilate the area. When the odors or fumes are gone from
the area, rewash and dry the clothing.
Allow the dryer to complete the cool down portion of the cycle
before removing the load.
Select a Sensor cycle with a lower heat setting to avoid
overdrying the load.
Solution