Plan Vent System - Whirlpool 240-VOLT ELECTRIC DRYER Use & Care Manual

Exhaust hoods:
n An exhaust hood should cap the vent to keep rodents and
insects from entering the home.
n Must be at least 12" (305 mm) from ground or any object
that may obstruct exhaust (such as flowers, rocks, bushes,
or snow).
n Do not use an exhaust hood with a magnetic latch.
Recommended Styles:
Louvered Hood
Acceptable Style:
Angled Hood
Elbows:
n 45° elbows provide better airflow than 90° elbows.
Good
Clamps:
n Use clamps to seal all joints.
n Exhaust vent must not be connected or secured with screws
or other fastening devices that extend into interior of duct
and catch lint. Do not use duct tape.
Box Hood
Better

Plan Vent System

Choose your exhaust installation type
Recommended exhaust installation:
A
A. Dryer
B. Elbow
C. Wall
D. Exhaust hood
E. Clamps
Alternate installations for close clearances:
Venting systems come in many varieties. Select the type best
for your installation. A close-clearance installation is shown
below. Refer to the manufacturer's instructions.
Over-the-top installation (also available with one offset elbow)
Over-the-Top Installation Kit Part Number 4396028 for close
clearance alternate installation is available for purchase.
For ordering information, see "Assistance or Service."
B
C
D
E
F
G
B
H
F. Rigid metal or
flexible metal vent
G. Vent length necessary to
connect elbows
H. Exhaust outlet
17