Switching The Information Display Mode - Hitachi DZ-BX31A Instruction Manual

15. Disc/Card type
I
: DVD-RAM
< / >
: DVD-RW (VR-mode/VF-mode)
K
: DVD-R
J
: DVD-RAM (write-protected)
$
: Protected DVD-RW (VR-mode) disc
"
: DVD-RW (VR-mode) disc finalized
on this video camera/recorder
?
: DVD-RW (VR-mode) disc finalized
on a device other than this DVD
video camera/recorder
#
: Finalized DVD-RW (VF-mode) disc
!
: DVD-R disc already finalized on this
DVD video camera/recorder
N*
: DVD-R disc finalized on a device
other than this DVD video camera/
recorder
* Includes DVD-R recorded on a Hitachi
DVD video camera/recorder model
older than DZ-GX20MA/MV780MA/
MV750MA/BX31A/GX20A/
MV780A/MV730A and not finalized.
O
: SD memory card
P
: Locked SD memory card
*6
No display
16. Movie recording quality (when using disc) (p. 94)
XTRA : Best quality
FINE : High quality
STD : Standard quality
Still recording quality (when using card) (p. 97)
FINE : High quality
NORM : Standard quality
ECO : Number of recordable stills is
prioritized
●Switching the information display mode
You can switch the display mode of on-screen information:
Press the DISPLAY button.
The full and minimum display modes will alternate.
• Full display mode: All types of information will
appear.
• Minimum display mode: The recording mode (see
1 on page 53) and recording status (see 12 on
page 53) will appear. If the DVD video camera/recorder has warning information, a warning
message will appear.
:
Note
The DVD video camera/recorder does not record the date and time as a part of image. However, this information
during recording will be recorded with image as data which can be checked on Disc Navigation screen during
playback (see "INFORMATION DISPLAY DURING PLAYBACK" on page 63).
17. Remaining space on disc/card
REM XX : Remaining recordable minutes
*8
MIN during movie recording
*9
REM XX : Number of remaining recordable
still images during still recording
18. Remaining battery level (p. 43)
w
(full charge)
x
y
z
(low remaining charge)
19. Volume (p. 59)
:
The volume can be adjusted during
external input and playback.
*1 EIS cannot be used when recording photos on DZ-
GX20MA or DZ-MV780MA.
*2 Not displayed on DZ-MV750MA or DZ-BX31A.
*3 When no disc or card is in the DVD video camera/
recorder, or disc has not yet been initialized, a write-
protected disc or locked card, or a disc or card with
no remaining space, has been inserted.
*4 "60×" will appear on DZ-BX31A.
*5 "1,000×" will appear on DZ-BX31A.
*6 When a disc or card that cannot be used in this
DVD video camera/recorder is inserted.
*7 No remaining time or number will be displayed with
a protected disc or locked card, or finalized DVD-
RW (VF-mode)/DVD-R disc.
*8 In XTRA mode, possible recording time may be
longer than the displayed time.
*9 The displayed number of recordable stills is for
reference: This number may not decrease,
depending on the recording conditions (not
displayed with a DVD-RW/DVD-R disc).
*7
DISPLAY
55